Bemm flat heating wall PVG180062SW3SPK 1800 x 625 mm, Spiegel , white 9016

Bemm plan heating PVG180062SW3SPK

• for central heating operation (additional equipment with electric heating element) with flat front
• fine side lines and side shadow light gaps as well as attached glass front (4 mm)
• Basic body without convection fins in welded design made of horizontal round tubes 35 mm and two rows of vertically arranged flat profile tubes 50 x 10 mm
• powder coated
• the sides of the front are set inwards at a 60° angle and leave a gap to the wall for shadow or light
• the sides have a concealed fold to accommodate the optionally available LED backlight
• Flat front conceals the complete valve set with centre connection DN 15 ( 2000 /2") x 50 mm
• for flow left or right and corner connection with Eurocone for compression fitting
• only the control knob of the optional thermostat is visible
• additional connection for electric heating element DN 15 ( 2000 /2") from bottom left
• Surface powder coated DIN 55900 and baked at approx. 180 °C
• additional glass pane in 4 different surface finishes
• Standard Zubehör : Valve set consisting of thermostatic valve pre-adjustable
• Lockshield valve and connecting parts
• Vent plug DN 8 ( 2000 /4") and 2000 wall bracket meets AK 3 according to VDI 6036
• with screws and dowels
• Thermal output according to DIN EN 442
• Heating medium water
• Max. permissible operating temperature 100 °C
• Max. permissible operating pressure 6 bar